...to daisychain power and video signals between screens to simplify cabling. Although large video walls require special controllers, small video walls can be set up just using multimonitor video cards. • KVM-switched tiling • Some KVM switch...

...of wires to provide power to external equipment. Many FireWire computer peripherals draw their power directly from the interface. • Computer peripherals using 6-pin FireWire connectors generally feature at least two, and often three, FireWire co...

...and accessory power over a single connector. • DisplayPort v1.1 supports a maximum of 10.8 Gbps over a 2-meter cable; v1.2 supports up to 21.6 Gbps. DisplayPort v1.2 also enables you to daisychain up to four monitors with only a single out...

...on the near end. •   • Power Sum Near-End Crosstalk (PS-NEXT) • PS-NEXT measures the unwanted signals from multiple pairs at the near end onto another pair at the near end. •   • Far-End Crosstalk (FEXT) • FEXT measures an unwanted signal from a pa...

...networks and controlling distributed processing. • Communication among these distributed systems and networks requires a standard approach to network design, one that defines the relationships and intersections between network services an...

...video in command and control room setups. • Corporate video sharing and training applications. • …or anywhere you want to use an existing LAN for video extension. •   • Easy to integrate into your network. • Because the MediaCento IPX PoE Multica...

...network and how much control you need over that network. • Unmanaged switches • are basic plug-and-play switches with no remote configuration, management, or monitoring options, although many can be locally monitored and configured via LED indica...

...metres per segment. The total end-to-end length must not exceed 72 metres with a maximum of 63 devices. • The connectors are 4- and 6-pin. The 6-pin version has two extra pins for power. • Learn more: • IEEE 488 - the general purpose interface •  

...can also be used to power accessories, such as interface cards for PDAs. • There are three primary types of M1 connectors: • M1-DA (digital and analog) • this is the most common connector, and it supports VGA, USB and DVI signals. • M1-D (digita...

...NAC • Network Access Control (NAC) is a method of ensuring that only known devices are allowed to connect to your network and that they meet your network’s requirements before they are granted access. • This is NAC at its most basic level. Howeve...