Cable termination • Cable termination • Carefully remove the jacketing from the cable and expose one inch of the insulated wire conductors. Do not remove any insulation from the conductors. When the RJ-45 connector is crimped, the contacts ins...

...antennas and antenna cables • Quality Antennas • To operate your wireless network properly, antennas and antenna cables are vital components. You should look at the quality. • For optimal performance of your WLAN • the antenna cable should not be...

...vs. Stranded patch Cable • Solid vs. Stranded Patch Cable • UTP Solid Cable • For runs between two wiring centres or from the wiring centre to a wallplate, choose our regular UTP cable. These solid-conductor cables, designed for horizontal and ...

...Single-Mode Fibre Optic Cable • Single-Mode Fibre Optic Cable • Multimode fibre cable has multiple modes of propagation—that is, several wavelengths of light are normally used in the fibre core. In contrast, single-mode fibre cable has only one mode...

...in 4-pair CAT5/CAT5e/CAT6 cable, leaving the other two pairs free to transmit power for Power over Ethernet (PoE) applications. However, Gigabit Ethernet or 1000BASE-T uses all four pairs of wires, leaving no pairs free for power. So how can PoE ...

...video over CATx cable at distances greater than 30 metres. • As cable length increases, picture quality decreases. Smearing is caused by the cable attenuating high-frequency signals. The image is also dimmer because of the cable’s resistance...

Crossover Cable • Crossover Cable • Crossover cable is generally used for hub-to-hub connections. The send and receive pairs are crossed between Connector A to Connector B on either end of the cable. There are two standards for the pairing of ...

...Explains: Fibre Optic Cable • Fibre optic cable is one of the fastest growing transmissions mediums for both new cabling installations and upgrades, including backbone, horizontal and even desktop applications. • The Black Box explain series make ...

...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...

...Zero Halogen) and PVC cables • LSZH and PVC cables • The European market is demanding that cables used in LANs, WANs, etc. meet LSZH specification. The IEC 60332-1 governs the Flame Retardant Grade specifications in reference to LSZH cables. • Red...