Hardened Managed Modular Switch 10M/100M/1G/10G

Built tough
The LE2700 Series Hardened Managed Modular Switch system is designed demanding applications such as:

• Oil/gas well and pipeline control and monitoring.
• Municipalities for public safety and traffic control.
• Security and surveillance providers for backhauling IP camera video and alarms.
• Utilities, including electric substations and water/waste water.
• SCADA/PLC/M2M systems for remote/automated communications.
• HVAC systems remote control and monitoring.

Scalable, flexible, cost-effective
This switch system is more than just tough. It's extremely versatile with a range of interface options. The modular design gives you the ability to add the right quantity, speed, and type of interfaces you need. If your needs change in the future, you can just swap out modules. Choose from copper and fiber modules, including a 10-GbE SFP+ module.

Ensure 100% uptime
With dual power supplies, the switch is designed for redundancy. Set it up in a ring topology. If a link fails, the switch automatically falls over in less than 30 milliseconds. The switch is also compatible with redundant switches from other manufacturers.

Very manageable
This switch includes extensive management software enabling you to manage it locally or remotely eliminating costly and time-consuming truck rolls. Software includes: SNMP, QoS, VLAN, IGMP Snooping, SMTP Client, DHCP; MRP, MSTP, and more.

Choose from following modules
4-Port, 100BASE-FX Multimode, 2km, SC Switch Module (LE2710C)
4-Port, 100BASE-FX Multimode, 2km, ST Switch Module (LE2711C)
Add four 100BASE-FX multimode ports to the LE2700 Series Hardened Managed Switch Chassis. Insert the modul into slot A, B, or C of the chassis (Slot D is occupied for 10G modules).
8-Port, 10/100/1000BASE-T, RJ-45 Switch Module (LE2720C)
Add eight 10/100/1000BASE-T RJ-45 ports to the LE2700 Series Hardened Managed Switch Chassis.
Insert the module into slot A, B, or C of the chassis (Slot D is occupied for 10G modules).
[i]8-Port, 100/1000BASE-T, SFP Switch Module (LE2721C)
Add eight 100-/1000-Mbps SFP ports to the LE2700 Series Hardened Managed Switch Chassis. Insert the module into slot A, B, or C of the chassis (Slot D is occupied for 10G modules). Use the SFP transceivers (LFP400 Series) with this module to add the connectors of your choice.
[i]4-Port, 100-/1000-Mbps SFP (LE2722C)
Add four 100/1000-Mbps SFP-ports to the LE2700 Series Hardened Managed Switch Chassis.
Insert it into slot D of the chassis and use the SFP+ transceivers (LSF400/LFP410 series) to add the connectors of your choice.
[i]4-Port, 10-Gig, SFP+ Switch Module (LE2731C)
Adds four 10-GbE SFP+ ports to the LE2700 Series Hardened Managed Switch Chassis. Insert it into slot D of the chassis and use the SFP+ transceivers (LSP420 series) to add the connectors of your choice.

SFP customization.
By plugging in different SFPs, you can customize the switch to the distances and connectors you need. Use the LFP400 Series SFP transceivers with all modules except the LE2731C. Use the SFP+ transceivers (LSP420 Series) with the 10-GbE module (LE2731C).

NOTE: The fourth slot (D) only holds the SFP modules LE2722C and LE2731C.

Approvals —
EMI:
FCC Part 15;
CISPR (EN55022) Class A;
EN50155 (EN50121-3-2;
EN55011; EN50121-4);
EMS:
EN61000-4-2 (ESD);
EN61000-4-3 (RS);
EN61000-4-4 (EFT);
EN61000-4-5 (Surge);
EN61000-4-6 (CS);
EN61000-4-8;
EN61000-4-11
Connectors —
LE2700AE:
RS-232 Serial Console Port: (1) RJ-45 via console cable,
(4) modular slots (LE2731 module works only in slot D)
Environmental —
Switch:
Operating Temperature: -40 to +85° C (-40 to +185° F);
Storage: -40 to +85° C (-40 to +185° F);
Humidity: 5 to 95%, noncondensing
Indicators — (39) LEDs:
(1) PWR, (1) PWR1, (1) PWR2, (1) RM, (1) Ring, (1) Fault, (1) Def, (1) Link, (1) SPD, (1) FDX, (1) RMT, (28) Port LEDs
Jumbo Frames — Up to 9.6 KB
MAC Table — 8 K
Network Redundance — MRP, MSTP (RSTP/STP compatible)
Power —
LE2700AE/UK:
Input: Dual 88–264 VAC/100–370 VDC terminal blocks;
Consumption (Typ.): 43.5 watts max.;
Overload Current Protection: Present
Priority Queues — 8
Processing — Store-and-forward
Security —
Device binding;
Enable/disable ports, MAC based port security;
Port-based network access control (802.1x);
Single 802.1x and Multiple 802.1x;
MAC-based authentication;
QoS assignment;
Guest VLAN;
MAC address limit;
TACACS+;
VLAN (802.1Q) to segregate and secure network traffic;
Radius centralized password management;
SNMPv3 encrypted authentication and access security;
Https/SSH enhance network security;
Web and CLI authentication and authorization;
Authorization (15 levels);
IP source guard
Software —
IEEE 1588v2 clock synhronization;
IEEE 801.1D Bridge;
auto MAC address learning/aging and MAC address (static);
Multiple Registration Protocol (MRP);
MSTP (RSTP/STP compatible);
Redundant Ring with recovery time less tham 30 ms over 250 units;
Quality of Service (802.1p) for real-time traffic;
VLAN (802.1Q) with VLAN tagging;
IGMP v2/v3 Snooping;
Port configuration, status, statistics, monitoring, security;
DHCP Server/Client;
DHCP Relay;
Modbus TCP;
DNS client proxy;
SMTP Client
Standards —
IEEE 802.3 10BASE-T;
IEEE 802.3u 100BASE-TX and 100BASE-FX;
IEEE 802.3ab 1000BASE-T;
IEEE 802.3z 100BASE-X;
IEEE 802.3ae 10 Gigabit Ethernet;
IEEE 802.3ad LACP (Link Aggregation Control Protocol);
IEEE 802.1p COS (Class of Service);
IEEE 802.1q VLAN tagging;
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol);
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol);
IEEE 802.1x authentication;
IEEE 801.1AB LLDP (Link Layer Discovery Protocol)
Dimensions — 4.4H x 44W x 32.5D cm (1.73"H x 17.32"W x 12.8"D), 19" rack-mountable
Weight — 6.6 kg (14.5 lb.)

Modules:
Connectors —
LE2710C: (4) 100BaseFX MM SC, 2km; fits into slot A, B, or C
LE2711C: (4) 100BaseFX MM ST, 2km; fits into slot A, B, or C
LE2720C: (8) RJ-45 10/100/1000M; fits into slot A, B, or C
LE2721C: (8) SFP Slots 10/100/1000M; fits into slot A, B, or C
LE2731C: (4) SFP/SFP+ Slots 10G; fits into slot D