10-Gigabit Layer2+ Web Smart Switch

Upgrade to 10-Gigabit Ethernet with this Web Smart L2+ switch. You'll get eight copper RJ-45 ports and two SFP/SFP+ slots. Use this switch in multiple applications and network environments. The dual-uplink slots give you extra reliability and redundancy, as well as extra flexibility. Choose from a number of SFPs depending on the distance you want to go.

Multiple network applications
The switch's small-form factor, only 22-cm wide, means you can put it in locations where larger switches won't fit. In SMB networks, use it as a high-speed core switch. In mid-size networks, use it as an aggregation switch between the core and the network edge. In enterprise networks, use it as an edge switch. In any of these applications, you'll get true 10-GbE performance that reduces end-user application latency issues. Better yet, the switch auto-negotiates speeds so it's backwards compatible with an existing Gigabit network.

See the big picture
The switch easily handles uncompressed ultra HD video as well as KVM switching and extension over IP. Use it to transmit video in control rooms, conference rooms, lobbies, etc.

Go the distance
The switch transmit data up to 100 meters over CAT6A cable. If you use CAT6 cable, you'll get distances of 45 meters. CAT5e cable can be used for Gigabit Ethernet up to 100 meters.

Secure
You'll get multiple security features. IP Source Guard prevents illegal IP addresses from accessing a specific port. ACLs support up to 256 entries. Storm control prevents traffic on the network from being disrupted by a broadcast, multicast, or unicast storm on a port.

Web smart management
The switch delivers advanced functionality including STP/RSTP/MSTP, IGMP Snooping, QoS, and more. The integral Web server enables Web-based management via Web browser. This GUI interface enables switch configuration, system dashboard, maintenance, and monitoring.

The wide range of management and support features also includes port mirroring, LLDP, sFlow®, UPnP®, IPv6, DHCP Client, SNTP, ping, and syslog.

Support for VLAN and QoS
Support for up to four thousand simultaneous VLANs enables you to segment traffic with port-based, 802.1Q tag-based, or MAC-based VLANs. VoIP traffic is automatically assigned to a voice-specific VLAN to maintain quality. 802.1p Layer 2 quality of service (QoS) enables prioritization of time-sensitive applications such as VoIP and video.

Green
The PoE+ Gigabit Managed Switch Eco features IEEE 802.3az energy-efficient Ethernet, which scales down power consumption during periods of low data activity. This feature adds up to energy savings of up to 50%.

Cable length detection adjusts signal strength to the cable length, reducing power consumption on shorter cable runs.

Approvals —CE; FCC Part 15 Class A
Connectors — (10) total;
(8) 100M/1G/10G RJ-45 ports
(2) 1G/10G SFP/SFP+ slots
Environmental —
Operating temperature: -10 to 50° C (14 to 122° F);
Storage temperature: -20 to +70°C (-4 to +158° F);
Operating humidity: 10 to 90% noncondensing;
IEEE 802.3az Energy Efficient Ethernet
Forwarding Rate/Switching Capacity —148.8 Mbps/200 Gbps
Jumbo Frames —9 K
Layer 2 Switching —
STP, RSTP, MSTP;
Trunking (static aggregation);
link aggregation control protocol (LACP)
4K VLANS, port-based VLAN, 802.1Q tag-based VLAN; MAC-base VLAN; management VLAN, private VLAN edge, protocol-based VLAN; Q-in-Q VLAN
IGMP v1/2/3 (supports 1024 multicast groups), snooping
Link Aggregation Control Protocol;
DHCP Relay
MAC Table —16 K
Management —
Port mirroring;
Web GUI;
Firmware upgrade;
NTP;
HTTP/HTTPs, ping, syslog;
DHCP client
QoS —
(8) Hardware queues;
Scheduling: strict priority, weighted round-robin, deficit weighted round robin, queue assignment based on DSCP and class of service;
Classification: port-based, 802.1p VLAN priority-based, IPv4/DSCP-based;
Rate limiting: Ingress policer, Egress shaping and rate control, per port
Security —Storm control, IP source guard, ACLs
Power —100-240-VAC, 50-60 Hz
Dimension —1U, 4.4H x 21.84W x 24.13D cm (1.73H x 8.6"W x 9.5"D)
Weight —1.9 kg (4.2 lb.)

(1) Switch
(1) Power cord
(1) Mounting kit
Quick-Start Guide